Increasing thickness of lines drawn in printouts of plans and elevations

Ask anything about about the tool menu, drawing walls, placing windows and doors, roof design, inserting dimensions, creating new floors, generating elevation views, importing and exporting, working with guidelines, inserting stairs etc
PatWoods
Posts: 8
Joined: Mon Mar 11, 2019 11:07 am

Increasing thickness of lines drawn in printouts of plans and elevations

Postby PatWoods » Fri Mar 15, 2019 6:17 pm

Hi folks,
I have printed out my house extension plans, but the lines are so thin they won't photocopy. Is there any way of increasing the general thickness of the printed lines? PatWoods

Support
Posts: 26
Joined: Mon Jul 16, 2018 9:46 am

Re: Increasing thickness of lines drawn in printouts of plans and elevations

Postby Support » Mon Mar 18, 2019 3:47 pm

Hi Pat

If in Plan mode you can right-click views and break them apart allowing you manually change thickness of lines etc. However, depending on your printer, there might be some settings here to make print a bit bolder. In Arcon Evo, there is an additional Plan Element mode that allows you modify each view separately before laying them up on to a single sheet.